Canon IXUS 245 HS User Manual Download Page 158

Page: 158 / 284

158

Shooting Range and Focusing

Still Images

Movies

Changing the AF Frame Mode

Change the AF (auto focus) frame mode to suit the shooting conditions as

follows.

Touch [

], touch [

], choose

[AF Frame] on the [

] tab, and then

choose the desired option (

86).

Still Images

Movies

Face AiAF

•

Detects people’s faces, and then sets the focus, exposure (evaluative

metering only), and white balance ([ ] only).

•

After you aim the camera at the subject, a white frame is displayed

around the person’s face determined by the camera to be the main

subject, and up to two gray frames are displayed around other detected

faces.

•

When the camera detects movement, frames will follow moving subjects,

within a certain range.

•

After you press the shutter button halfway, up to nine green frames are

displayed around faces in focus.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands