Canon IXUS 125 HS Manual Download Page 92

Page: 92 / 220

Applying Special Effects

Choose a single image color to keep and change other colors to black and
white.

Choose .

Follow steps 1 – 2 on p. 82 and choose .

Access the setting screen.

Press the button.
The original image and the Color Accent
image are displayed one after another.
By default, green is the color that will be kept.

Specify the color.

Position the center frame over the color to
keep, and then press the button.
The specified color is recorded.

Specify the range of colors to keep.

Press the

buttons to adjust the range.

To keep only your specified color, choose a
large negative value. To keep colors similar
to your specified color as well, choose a large
positive value.
Press the

button to return to the shooting

screen.

Shooting with Color Accent

Still Images

Movies

Recorded Color

•

Using the flash in this mode may cause unexpected results.

•

In some shooting scenes, images may look grainy and colors may
not look as expected.

Downloaded From camera-usermanual.com

Summary of Contents for IXUS 125 HS





























































































































































































































Search results

Summary of Contents for IXUS 125 HS

Reviews:

Related manuals for IXUS 125 HS

Brands by name

Popular brands

Canon IXUS 125 HS, Manual

Search results

Summary of Contents for IXUS 125 HS

Reviews:

Related manuals for IXUS 125 HS

Brands by name

Popular brands