iR6570-013
(2/5)
Service work:
When the symptom above occurs, carry out the following procedure.
1. Refer to "Service manual" > "Image formation" > "7.10.3 Primary Charging Assembly", remove the Primary
Corona Assembly from the copier and check if the part [2] of Primary Fan Duct is warped to the Corona Assembly
(to the left).
2. If it is warped like [2], refer to "Service manual" > "Image formation" > "7.10.1 Process Unit" and remove the
Process Unit (AP kit) from the copier.
3. Unscrew two screws [3] and remove the Primary Fan Duct [4].
