manualshive.com logo in svg

Canon iR2020 Series, Copying Manual, Page: 78 / 115

Share
Download
Canon iR2020 Series Copying Manual Download Page 78

Two-Sided Copying

2-24

Special Cop

y

ing F

e

atures

2

3

Press [

] or [

] to set the orientation of the two-sided 

originals (‘BOOK TYPE’ or ‘CALENDAR TYPE’) 

➞

 press [OK].

Details of each item are shown below.

4

Press [

] or [

] to set the orientation of the two-sided 

copies (‘BOOK TYPE’ or ‘CALENDAR TYPE’) 

➞

 press [OK].

Details of each item are shown below.

The Standby display appears, and an asterisk (*) appears on the LCD display 
indicating that the 2 to 2-Sided mode is set.

‘BOOK TYPE’:

The front and back sides of the original have the 
same top-bottom orientation.

‘CALENDAR TYPE’:

The front and back sides of the original have 
opposite top-bottom orientations.

‘BOOK TYPE’:

The front and back sides of the copy will have the 
same top-bottom orientation.

‘CALENDAR TYPE’:

The front and back sides of the copy will have 
opposite top-bottom orientations.

OK

OK

Summary of Contents for iR2020 Series




















































































































Reviews:

No comments