manualshive.com logo in svg

Canon iR1600 Series, Reference Manual

Share
Download
Canon iR1600 Series Reference Manual Download Page 35

1-17

Main Power and Control Panel Power

Before You Start 

U

s

ing This Ma

chine

1

The below is displayed until the machine gets ready to scan.

The screen below is displayed when the machine is ready to scan.

It takes about 30 seconds (at a room temperature of 20°C) for the machine to warm up.

IMPORTANT

•

If you turn off the main power, wait for at least three seconds before turning the main power back on.

NOTE

•

The standard settings are selected at power on.

•

The standard copy settings are as follows:
- Copy ratio: Direct (100%)
- Paper selection: Auto Paper Selection
- Copy exposure: 5
- Copy quantity: 1

•

You can change the standard copy settings. (See the Copying Guide.)

•

You can reserve a job when the display above appears. (See the Copying Guide.)

3

When a message appears on the display, follow the instructions.

●

If the message <ENTER DAC> appears:

▼

Enter the Department ID using the numeric keys, and press 

.

▼

Enter the Password.

PLEASE WAIT

100% AUTO PAPER

TEXT

01

ENTER DAC

_

ENTER DAC

1234567

DAC PASSWORD

✱ ✱ ✱ ✱ ✱ ✱ ✱

Summary of Contents for iR1600 Series



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands