Canon iR C6800 Series, Portable Manual

Page: 96 / 456

Chapter 2
2-42
2.6.5 Points to Note When
Mounting the Pressure
Roller
0005-8345
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Be sure to mount the pressure roller [1] so that the lot
number [2] found on its edge is found toward the front
of the machine.
F-2-75
2.6.6 Adjusting the Nip
Pressure of the Pressure
Roller
0005-9076
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
The nip is adjusted to a high degree of accuracy before
the machine is shipped out of the factory, and it cannot
be adjusted in the field. Do not turn the 2 hex bolts [1]
found on the delivery side of the fixing assembly. If
you turned it by mistake, be sure to turn it back to its
initial position.
F-2-76
2.6.7 Adjusting the
Position of the Feeding
Web Solenoid (SL2)
0004-2616
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Pull on the solenoid [1], and tighten the screw [4]
while making sure that the lever [2] is in firm contact
with the plate at a specific point [3].
F-2-77
2.6.8 Points to Note About
the Position of the Fixing
Thermal Switch
0004-5056
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
After mounting the thermal switch, make sure of
Front
[1]
[2]
[1]
[2] [1]
[3] [4]