Canon iR C6800 Series, Portable Manual

Page: 299 / 456

Chapter 5
5-105
5.5.2 FEEDER
5.5.2.1
FEEDER List
0005-1259
iR C6800C / iR C6800CN
CHK-
TYPE Use it to select a partition number for execution of HD-CHECK.
Method of Operation
1) Select the item.
2) Select a partition number using the keypad.
0: check on and recovery of entire HDD
1: image storage area
2: general-purpose file storage area
3: PDL-related file storage area
4: firmware storage area
- A general-purpose file refers to a file containing such management
data as user settings data, log data, PDL spool data, image data.
3) Press the OK key.
1
HD-
CHECK Use it to check the partition selected by CHK-TYPE and to repair a
fault.
Method of Operation
1) Select the item.
2) Press the OK key.
3) Check the result. (1: OK; 2: NG (hardware); 3: NG (software);
recovery sector/alternate sector).
1
HD-
CLEAR Use it to select the partition selected by CHK-TYPE.
- if 0 or 4 is selected, the selection will be invalid.
- if 1 is selected, the image management data stored in the SRAM area
and the general-purpose file area will also be initialized.
Method of Operation
1) Select the item.
2) Press the OK key.
! If '1: image storage area' or '3: PDL-related file storage area' is
selected under 'CHK-TYPE' and <HD-CLEAR> is executed, the
initialization will take place only when the power has been turned off
and then on again.
The initialization will take about 5 min, during which the progress bar
will grow longer gradually. You must never turn off the power while
the progress bar is indicated.
1
COPIER>FUNCTION>SYSTEM
Subheadin
g
Contents Level