Canon iR C6800 Series, Portable Manual

Page: 106 / 456

Chapter 2
2-52
2.8 Pickup/Feeding System
2.8.1 Adjusting the
Horizontal Registration
After Replacing the
Pickup Cassette
0003-9954
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Make prints using the cassettes 3 and 4 as the source
of paper, and check to make sure that the left/right
margin is as indicated.
- If not as indicated, make the following adjustments:
1) Press the cassette release button, and slide out the
cassette 3 or 4 to the front.
2) Open the upper right cover and the lower right
cover.
3) Insert a screwdriver through the opening in the
front right stay; then, loosen the screw [1], and adjust
the position of the adjusting plate [2].
F-2-97
- move the adjusting plate toward the rear to decrease
the left margin.
- move the adjusting plate toward the front to increase
the left margin.
4) Tighten the screw.
5) Close the upper right cover and the lower right
cover.
6) Put the cassette 3 or 4 back in the machine.
2.8.2 Adjusting the Manual
Feed Pickup Horizontal
Registration
0003-9955
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Make copies using the manual feed tray as the source
of paper, and check to make sure that the left/right
margin is as indicated.
- if not, make the following adjustments:
1) Loosen the screw [1], and move the position of the
slide guide [2] to adjust the horizontal registration.
F-2-98
2) Check to make sure that the left/right margin of the
prints is as indicated.
3) Tighten the screw.
2.8.3
Adjusting the Front
Deck Pickup Horizontal
Registration
0003-9957
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Make prints using the right deck and left deck as the
source of paper, and check to be sure that the left/
[1]
[2]
[1]
[2]