Canon iPR C7010VP Series, Installation Manual

Page: 139 / 157

Chapter 2
2-94
1) Remove the middle deck pickup unit.
Please ref er to "Removing Upper , Middle, and Lower Deck Pickup
Units" of "POD Deck A1 Service Manual."
The subsequent steps are the same as the case of upper deck pickup unit.
2.2.6 Lower Deck Pickup Unit
2.2.6.1 Lower Deck Pickup Unit
0026-5010
imagePRESS C6010 / imagePRESS C7010VP / imag ePRESS C6010VP /
imagePRESS C7010VP FS / imageP RESS C7010VP PSU / imagePRESS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
F-2-395
T-2-7
1) Remove the lower deck pickup unit.
Please ref er to "Removing Upper , Middle, and Lower Deck Pickup
Units" of "POD Deck A1 Service Manual."
The subsequent steps are the same as the case of upper deck pickup unit.
2.2.7 Upper Vertical Path Unit
2.2.7.1 Upper Vertical Path Unit
0026-5011 imagePRESS C6010 / imagePRESS C7010VP / imag ePRESS C6010VP /
imagePRESS C7010VP FS / imageP RESS C7010VP PSU / imagePRESS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
F-2-396
T-2-8
1) Remove the upper vertical path unit.
Please refer t o " Upper Ve rtical Path Unit" i n " POD Deck A1 Ser vice
Manual."
2) Remove the harness guide [1].
- 1 screw [2]
F-2-397
3) Remove the 2 motor mounts [1] and the 2 timing belts [2].
- 2 screws each [3]
No. Name of part Qty.
[1] Lower deck pickup solenoid (SL801) 1
[2] Lower deck pull-out roller 1
[3] Pickup feed belt 3
[1]
[3]
[2]
No. Name of part Qty.
[1] Upper vertical path roller 1 1
[2] Upper vertical path roller 2 1
CAUTION:
Support the upper vertical path unit when working with the unit in the
upright position.
[1]
[2]
[2]
[1]