manualshive.com logo in svg

Canon IPF850, User Manual

The Canon IPF850 is a high-performance large format printer designed for professionals seeking superior printing quality. With its advanced features and functionalities, this powerful device ensures remarkable precision and efficiency. Easily access the comprehensive User Manual for free download from our website to maximize your printing experience with the Canon IPF850.

Share
Download
background image

Paper position not suitable for borderless printing.

Paper position not suitable for borderless printing.

Cause

Corrective Action

Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the 

Paper Reference Guide

.

 (See "

Displaying the Paper Reference Guide

.")

➔

P.335

The paper is loaded askew.

Press 

▲

 or 

▼

 to select 

Change Paper

 and straighten the paper so that the edges are between

the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.

 (See "

Attaching the Roll Holder to Rolls

.")

➔

P.342

Press 

▲

 or 

▼

 to select 

Print With Border

, and then press the 

OK

 button to continue printing.

The document will be printed with a border.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

Roll feed unit error.

Roll feed unit error.

Cause

Corrective Action

There is a problem with the
Roll Unit.

Turn off the printer and wait at least three seconds before restoring the power. If the message is dis-
played again, contact your Canon dealer for assistance.

The roll feed unit is loose.

The roll feed unit is loose.

Cause

Corrective Action

The Roll Unit is detached from the printer. Push the Roll Unit firmly all the way in.

Stacker not ready.

Stacker not ready.

Cause

Corrective Action

The Stacker is not ready. When printing using the Stacker, check the following.

•

The Stacker Power is on.

•

The Stacker is installed in the right position on the Printer.

Once the preparation is finished, start printing by pressing 

▲

 or 

▼

 to select "

Print

".

When printing without using the Stacker, prepare the following.

•

Remove the Stacker from the Printer.
Move the Stacker sufficiently far away from the Printer.

Once the preparation is finished, start printing by pressing 

▲

 or 

▼

 to select "

Print

".

Stop printing by pressing 

▲

 or 

▼

 to select "

Stop Printing

".

Cutting Mode not Automatic.

Cutting Mode not Automatic.

Cause

Corrective Action

The Stacker is ready to be used, however, the Printer 

Cutting

Mode

 is not set to 

Automatic Cut

.

Or 

Automatic Cutting

 is not set to 

Yes

 in the Printer Driver.

(

*1

)

After removing the Stacker, start printing by pressing 

▲

 or 

▼

 to

select "

Print again

".

Stop printing by pressing 

▲

 or 

▼

 to select 

CANCELED

.

Set 

Cutting Mode

 to 

Automatic Cut

 in the Control Panel menu

and then print again.
Alternatively, set 

Automatic Cutting

 to 

Yes

 in the Printer Driver

and then print again.

(

*2

)

*1:

This is for Windows.For Mac OS, it is not set to 

Printer Default

.

*2:

This is for Windows.For Mac OS, set to 

Printer Default

 and then print again.

Paper position not suitable for borderless printing.

                                                                                                                                                   

iPF850

                                                                                                                                                                                                                     

User's Guide

 

 

Error Message

Messages regarding paper

 

662

Summary of Contents for IPF850























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IPF850

Canon MX490 Series Setup Manual preview
MX490 Series
Brand: Canon Pages: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Brand: Canon Pages: 2
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Brand: Canon Pages: 4
Oki ES7131 User Manual preview
ES7131
Brand: Oki Pages: 137
B-TEK Scales T403S Install And Configure preview
T403S
Brand: B-TEK Scales Pages: 3
B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
B-PWR PAFB-1C Instruction Manual preview
PAFB-1C
Brand: B-PWR Pages: 12
BAC Nexus Quick Start Manual preview
Nexus
Brand: BAC Pages: 10
Baby’s Journey 02000 User Manual preview
02000
Brand: Baby’s Journey Pages: 2
Darfon B09ULF Installation Manual preview
B09ULF
Brand: Darfon Pages: 28
VanEssa mobilcamping V1 User Instruction preview
V1
Brand: VanEssa mobilcamping Pages: 8
FANATEC CSL Elite Racing Wheel Quick Manual preview
CSL Elite Racing Wheel
Brand: FANATEC Pages: 2
FANATEC CSL Quick Manual preview
CSL
Brand: FANATEC Pages: 8
FANATEC Clubsport User Manual preview
Clubsport
Brand: FANATEC Pages: 35
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
S+S Regeltechnik AERASGARD RCO2-W Manual preview
AERASGARD RCO2-W
Brand: S+S Regeltechnik Pages: 7
ZARD ZUMA Fitting Manual preview
ZUMA
Brand: ZARD Pages: 2
Nanoleaf Elements Quick Start Manual preview
Elements
Brand: Nanoleaf Pages: 14

Brands by name

Popular brands

Load more brands