Cause
Corrective Action
When
Detect Mismatch
in the Control Panel menu is
set to
Pause
or
Hold Job
, the width of the loaded roll
does not match the width specified in
Fit Roll Paper
Width
in the printer driver.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Follow these steps to replace the roll to match the width specified in the
printer driver.
1.
Press
▲
or
▼
to select
Change Paper
, and then press the
OK
button.
Removing the Roll from the Printer
Removing the Roll Holder from Rolls
2.
Replace with paper of the width configured in the printer driver.
Attaching the Roll Holder to Rolls
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed when you se-
lect
Fit Roll Paper Width
in the printer driver matches the width of the roll
loaded in the printer, and then try printing again.
Paper size not detected.
Paper size not detected.
Cause
Corrective Action
Paper has been loaded askew, or warped paper has been loaded.
Lift up the Release Lever and reload the
paper.
If "
Not finished printing. Finish printing
remaining jobs?
" is displayed on the Dis-
play Screen, press the
OK
button.
Printing will resume, starting from the page
on which the error occurred.
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
Because the Platen is soiled with ink or other substances, the size of the clear film
cannot be detected.
Open the Top Cover and clean the entire
Platen.
Insufficient paper for job
Insufficient paper for job
Cause
Corrective Action
The printer has received a print job longer than the amount of roll paper left when
Man-
ageRemainRoll
in the Control Panel menu is
On
.
Press
▲
or
▼
to select
, and then
press the
OK
button to resume printing.
However, the roll paper may run out dur-
ing the print job and you may not be able
to print all of the document.
Press
▲
or
▼
to select
Change Paper
,
and then press the
OK
button to stop
printing.
Removing the Roll from the Print-
Press
▲
or
▼
and select
Stop Printing
or
press the
Stop
button to stop printing.
Paper size not detected.
iPF850
Error Message
Messages regarding paper
656
Summary of Contents for IPF850
