manualshive.com logo in svg

Canon IPF850, User Manual, Page: 635 / 694

Share
Download
Canon IPF850 User Manual Download Page 635

Cause

Corrective Action

You are printing on heavyweight paper
or paper that curls or wrinkles easily af-
ter absorbing ink.

For paper-based media such as Heavyweight Coated Paper, set the 

VacuumStrngth

 to

Strong

 or 

Strongest

 in the Control Panel menu. If the paper still rubs against the print-

head, set the 

Head Height

 in the Control Panel menu to a higher value than the current

setting.

 (See "

Adjusting the Vacuum Strength

.")

➔

P.570

 (See "

Troubleshooting Paper Abrasion and Blurry Images

.")

➔

P.562

For film-based media such as Tracing Paper, set the 

VacuumStrngth

 to 

Standard

,

Strong

 or 

Strongest

 in the Control Panel menu. If the paper still rubs against the print-

head, set the 

Head Height

 in the Control Panel menu to a higher value than the current

setting.

 (See "

Adjusting the Vacuum Strength

.")

➔

P.570

 (See "

Troubleshooting Paper Abrasion and Blurry Images

.")

➔

P.562

The Ejection Guide is soiled.

Clean the Ejection Guide.

 (See "

Cleaning the Printer Exterior

.")

➔

P.599

The surface of the paper is dirty

The surface of the paper is dirty

Cause

Corrective Action

The Paper Retainer is soiled.

Clean the Paper Retainer.

 (See "

Cleaning Inside the Top Cover

.")

➔

P.599

You are using a paper that does
not dry easily.

In the Control Panel menu, set 

Roll DryingTime

 to at least 

1 min.

 (See "

Menu Settings

.")

➔

P.449

When paper that does not dry easily is used for printing, it may curl during printing and touch the
Output Tray.
In this case, in the Control Panel menu, complete the settings for 

Dry time

 and 

Area

 in 

Scan

Wait Time

.

However, note that printing will now take longer.

 (See "

Menu Settings

.")

➔

P.449

The Stacker is dirty.

Clean the Stacker.

 (See "

Cleaning the Stacker

.")

➔

P.601

The back side of the paper is dirty

The back side of the paper is dirty

Cause

Corrective Action

The Platen has become dirty after borderless
printing or printing on small paper.

Open the Top Cover and clean the Platen.

 (See "

Cleaning Inside the Top Cover

.")

➔

P.599

In the Control Panel menu, set 

CarriageScanWdth

 to 

Fixed

.

 (See "

Menu Settings

.")

➔

P.449

The Platen has become soiled because you
have set 

Width Detection

 to 

Off

 in the Control

Panel menu.

Set 

Width Detection

 to 

On

 in the Control Panel menu, and then open the Top

Cover and clean the Platen.

 (See "

Cleaning Inside the Top Cover

.")

➔

P.599

Open the Top Cover and clean the Platen. After this, manually advance the roll
onto the Platen before printing.

 (See "

Cleaning Inside the Top Cover

.")

➔

P.599

 (See "

Feeding Roll Paper Manually

.")

➔

P.357

The Platen suction is too strong.

In the Control Panel menu, reduce the level of 

VacuumStrngth

.

 (See "

Adjusting the Vacuum Strength

.")

➔

P.570

The Stacker is dirty.

Clean the Stacker.

 (See "

Cleaning the Stacker

.")

➔

P.601

Printed colors are inaccurate

Printed colors are inaccurate

Cause

Corrective Action

Color adjustment has not been activated in the 

Ad-

vanced Settings

 of the printer driver.

In the 

Advanced Settings

 of the printer driver, access 

Color Settings

 in 

Col-

or Mode

 to adjust colors.

 (See "

Main Sheet (Windows)

.")

➔

P.166

 (See "

Main Pane (Mac OS)

.")

➔

P.272

iPF850

                                                                                                                                                                              

The surface of the paper is dirty

User's Guide

                                                                                                                                                                                                                      

 

 

Troubleshooting

Problems with the printing quality

635

 

Summary of Contents for IPF850























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments