Canon IPF850, Basic Manual, Page: 150 / 166

Cause Corrective Action
The Stacker is not ready. •
The Stacker Power is on.
•
The Stacker is installed in the right position on the Printer.
Once the preparation is finished, start printing by pressing ▲ or ▼ to select " Print ".
When printing without using the Stacker, prepare the following.
•
Remove the Stacker from the Printer.
Move the Stacker sufficiently far away from the Printer.
Once the preparation is finished, start printing by pressing ▲ or ▼ to select " Print ".
Stop printing by pressing ▲ or ▼ to select " Stop Printing ".
Cutting Mode not Automatic.
Cutting Mode not Automatic.
Cause Corrective Action
The Stacker is ready to be used, however, the Printer Cutting
Mode is not set to Automatic Cut .
Or Automatic Cutting is not set to Yes in the Printer Driver.(
*1
)
After removing the Stacker, start printing by pressing ▲ or ▼ to
select " Print again ".
Stop printing by pressing ▲ or ▼ to select CANCELED .
Set Cutting Mode to Automatic Cut in the Control Panel menu
and then print again.
Alternatively, set
Automatic Cutting to Yes in the Printer Driver
and then print again.(
*2 )
*1: This is for Windows.For Mac OS, it is not set to Printer Default .
*2:
This is for Windows.For Mac OS, set to Printer Default and then print again.
Cutting Mode not Automatic. iPF850 Series
Basic Guide
Error Message
Messages regarding paper
150