Canon iPF8000 - imagePROGRAF Color Inkjet Printer Service Manual Download Page 78

Page: 78 / 200

Chapter 3

3-6

F-3-12

3.1.2.3 Installing the Printer

0014-8924

Installing the printer must be done by more than four people.

1) Remove the black belts from around the printer and remove the top packaging material.

F-3-13

2) While two people are holding the carrying handles under the printer on one end and lifting the printer a little, have a third person to remove the packaging material

from under the printer.

Also remove the packaging material on the other side of the printer by the same way.

F-3-14

3) Hold the carrying handles under the printer by two to three people on each side, lift the printer.

Summary of Contents for iPF8000 - imagePROGRAF Color Inkjet Printer









































































































































































































Search results

Summary of Contents for iPF8000 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF8000 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands

Canon iPF8000 - imagePROGRAF Color Inkjet Printer, Service Manual

Search results

Summary of Contents for iPF8000 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF8000 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands