Canon iPF605 - imagePROGRAF Color Inkjet Printer User Manual Download Page 522

Page: 522 / 578

Problems Regarding Paper

Clearing Jammed Roll Paper

If paper from a roll becomes jammed,

Paper jam.

is shown on the Display Screen of the Control Panel.

Remove the jammed paper as follows.

Note

•

For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed

Slot, see “Clearing Jammed Paper (Paper Feed Slot)”. (→P.123)

Open the Roll Feed Unit Cover. Use a store-bought cutter or the like to cut the paper of the

loaded roll.

Caution

•

When cutting paper, be careful to avoid injury and damaging the printer.

Press

Load/Eject

button.

Remove the jammed paper.

•

If paper is jammed inside the Top Cover

Open the Top Cover and move the Carriage to the side.

508 Troubleshooting

Summary of Contents for iPF605 - imagePROGRAF Color Inkjet Printer



































































































































































































































































































































































































































































































































































































Canon iPF605 - imagePROGRAF Color Inkjet Printer, User Manual, Page: 522 / 578

Search results

Summary of Contents for iPF605 - imagePROGRAF Color Inkjet Printer

Reviews: