Canon iP110B, Online Manual

Page: 69 / 427

Printing from Computer or Smartphone with Google Cloud Print
When you send print data with Google Cloud Print, the printer receives the print data and prints it
automatically if the printer is turned on.
When printing from a smartphone, tablet, computer, or other external device by using Google Cloud Print,
load paper into the printer in advance.
1. Make sure that the printer is turned on
Note
• If you want to send the print data from an outside location, turn on the printer in advance.
2. Send print data from your smartphone, tablet, or computer
The figure below is an example of when printing from the web browser corresponding with Google Cloud
Print. The screen differs depending on the applications or services supporting Google Cloud Print.
When the preparation for printing with Google Cloud Print is complete and when the printer is turned on,
the printer receives the print data and prints it automatically.
Note
• If the firmware version is Ver. 2.010 or later, you can select which printer to use.
For the printing method, you can also select using the local network or using the cloud.
• Depending on the communication status, it may take a while to print the print data or the printer may not
receive the print data.
• While printing with Google Cloud Print, the printing may be canceled depending on the printer's status,
such as when the printer is being operated or an error has occurred. To resume printing, check the
printer's status, then print with Google Cloud Print again.
• For print settings:
• If you select the media type other than plain paper or if you select the paper size other than A4/
Letter/B5/A5-size, the print data is printed in single-sided even when you select the duplex print
setting. (* The paper size differs depending on the model of your printer. For information about the
supported paper sizes, go to the
Online Manual home page, and refer to the "Cannot Print Properly
with Automatic Duplex Printing" for your model.)
69