Canon iP110B Online Manual Download Page 392

Page: 392 / 427

2500

Cause

The cause of following may have occurred the failure of Automatic Print Head Alignment.

• Print head nozzles are clogged.

• The paper of size other than A4 or Letter is loaded.

• The paper output slot is exposed to strong light.

Action

Press the printer's

RESUME/CANCEL

button to dismiss the error, then take the actions described below.

• Print the nozzle check pattern to check the status of the print head.

• Load a sheet of A4/Letter-sized Canon Matte Photo Paper MP-101 and perform Automatic Print Head

Alignment again.

• Adjust your operating environment and/or the position of the printer so that the paper output slot is not

exposed directly to strong light.

After carrying out the above measures, if the problem continues after aligning the print head again, press
the printer's

RESUME/CANCEL

button to dismiss the error, and then perform Manual Print Head

Alignment.

392

Summary of Contents for iP110B












































































































































































































































































































































































































































Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands

Canon iP110B, Online Manual

Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands