Canon iP110B Online Manual Download Page 131

Page: 131 / 427

Checking the Ink Status with the Ink Lamps

1. Make sure that the power is turned on.

2. Open the print head cover.

Replacing Procedure

3. Check the ink lamp.

Close the print head cover after checking the ink lamp status.

Replacing Procedure

• The ink lamp is on.

The ink tank is correctly installed.

• The ink lamp is flashing.

Flashing slowly (at around 3-second intervals)

...... Repeats

Ink tank is running low. Prepare a new ink tank.

Flashing fast (at around 1-second intervals)

...... Repeats

Ink has run out. Replace it with a new one.

• The ink lamp is off.

The ink tank is not installed properly or the function for detecting the remaining ink level is

disabled. If the ink tank is not firmly in place, press the

mark on the ink tank until the ink tank

clicks into place.

If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer
cannot print. Check the

Alarm

lamp on the printer.

If an Error Occurs

Note

• You can also check the ink status on the computer screen.

Checking the Ink Status from Your Computer

131

Summary of Contents for iP110B












































































































































































































































































































































































































































Search results

Summary of Contents for iP110B

Reviews:

Canon iP110B, Online Manual, Page: 131 / 427

Search results

Summary of Contents for iP110B

Reviews: