11
11
Installation Procedure > Installing the Inner Finisher in the Host Machine
Installation Procedure > Installing the Inner Finisher in the Host Machine
2) Manipulate the left cover of the host machine and fix the tray lower cover.
• 2 screws (RS Tightening; M3x8)
3) Fix the screw removed at step 7) of “Preparation at the Host Machine”.
x3
4) Fix the rail support (F1) included in the inner puncher carton.
• 2 screws (RS Tightening; M3x8)
x2
F-1-24
F-1-25
5) Move the finisher mount of the rail unit to the left till it stops.
F-1-26