14
14
Installation Procedure > Installing the Inner Finisher in the Host Machine
Installation Procedure > Installing the Inner Finisher in the Host Machine
9) Fix the finisher at front.
• 1 screw (RS Tightening; M3x8)
x1
10) Fix the path guide.
x2
F-1-32
F-1-33
11)In the case the additional tray (option) has been installed, follow the procedure below or
proceed to the next step if not.
Go to the rear side and remove 2 screws from the additional tray drive. Fix the motor
cover(OP) with the removed 2 screws.
x2
x2
F-1-34