Canon imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual Download

Page: 305 / 476

Storing New Addresses

10-19

Stor

ing/Editin

g Ad

dress Book Settin

Press the Protocol drop-down list

➞

select the desired

protocol.

NOTE

For more information on the available protocols, see "Using the Keyboard," on p.
2-12.

Set [Host Name], [Folder Path], [User], and [Password].

NOTE

For instructions on specifying each of the settings for FTP, Windows (SMB),
NetWare (IPX), and WebDAV, see "Specifying a File Server," on p. 2-11.

Finish storing the address.

●

If Access Number Management is set to 'On':

❑

Press [Next].

❑

Press [Access Number].

❑

Press [Access Number]

➞

enter the access number using

(numeric

keys).

❑

Press [Confirm]

➞

re-enter the access number for confirmation using

(numeric keys)

➞

press [OK]

➞

[OK].

If you do not want to set an access number for this file server address, press
[OK] without entering any number.

●

If Access Number Management is set to 'Off':

❑

Press [OK].

Group Addresses

The Group Address feature enables you to create a group of up to 256 stored
destinations as a single destination.

IMPORTANT

If you want to store a group address, the destinations must be stored beforehand, such
as fax numbers, e-mail addresses, and file server addresses.

Summary of Contents for imageRUNNER C3480





























































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands

Canon imageRUNNER C3480, Sending And Facsimile Manual Sending And Facsimile Manual

Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands