Canon ImageRunner C2550, Network Manual, Page: 88 / 234

Setting Up a Computer for Printing/Sending a Fax 3-46
3
Usin
g a
TCP/IP Netw
or
k
■
Changing the Port after Installing the Driver
1
Install Canon LPR2, and change the port settings.
If you are using Windows Vista or you do not want to use Canon LPR2, proceed
to step 2.
For instructions on how to install Canon LPR2 and set ports, see the
Canon LPR2
User's Guide (PDF manual). For instructions on how to display the Canon LPR2
User's Guide
, see the
Network Quick Start Guide
.
IMPORTANT
If you use LPD, enter one of the following in [LPR Queue Name] in the [Add Port]
dialog box of Canon LPR2:
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print
queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk, regardless of
its spool settings.
- DIRECT
The machine prints without spooling a print job on the hard disk, regardless of its
spool settings.
2
In the printer properties dialog box of the printer you installed,
select the [Ports] sheet
➞
click [Add Port].