Canon imageRUNNER ADVANCE C7260, Before Using

Page: 62 / 76

60
Item Specifi cations
Capacity Per Tray
Collate, Group mode
Tray A, Tray C:
LTR and EXEC:
1,500 sheets (or 7 3/4” (195 mm) in height) *1
11” x 17”, LGL, and LTRR:
750 sheets (or 3 7/8” (97 mm) in height)
Staple mode
Tray A, Tray C:
One point at front (diagonal)/One point at back (diagonal)/Two points in center (parallel)
LTR and EXEC:
1,500 sheets/100 sets (7 3/4” or (195 mm) in height)
*1
11” x 17”, LGL, and LTRR :
750 sheets/50 sets (3 7/8” (97 mm) in height)
No Collating mode with diff erent paper sizes
Tray A:
750 sheets (or 3 7/8” (97 mm) in height)
Tray B:
11” x 17”, LGL, LTRR, LTR, STMTR, and EXEC:
125 sheets (or 5/8” (16 mm) in height) *2
Tray C:
750 sheets (or 3 7/8” (97 mm) in height)
Collate/Group/Staple mode with diff erent paper sizes
Tray A, Tray C:
750 sheets (or 3 7/8” (97 mm) in height)
Z-Fold mode (When the Paper Folding Unit-G1 is attached)
Tray A :
11” x 17”:
30 sheets
LTRR and LGL:
10 sheets
Tray B:
11” x 17”, LGL, and LTRR:
10 sheets
Tray C:
11” x 17”:
30 sheets
LTRR and LGL:
10 sheets
Half Fold mode (When the Paper Folding Unit-G1 is attached)
Tray A:
LTRR:
10 sheets
Tray B:
LTRR:
10 sheets
Tray C:
LTRR:
10 sheets
Saddle Stitch mode:
1 to 5 sheets/25 sets, 6 to 10 sheets/15 sets, 11 to 16 sheets/10 sets, 17 to 20 sheets/5 sets
*1 Up to 750 sheets (or 3 7/8” (97 mm) in height) when thin paper or custom paper lighter than 16 lb bond
(59 g/m
2
) is selected.
*2 Up to 30 sheets when printing on mixed paper sizes including any of the following: 13” x 19”, 12 5/8” x 17
11/16”, 12” x 18”.
Max. Stapling Capacity/
Available Staple Size
When the standard staple cartridge is attached:
(The maximum stapling capacity may vary, depending on the paper type and weight.)
LTR and EXEC:
100 sheets (20 lb bond (80 g/m 2 )) or Heavy paper below 1/2” (11 mm)
11” x 17”, LGL, and LTRR:
50 sheets (20 lb bond (80 g/m 2 )) or Heavy paper below 1/4” (5.5 mm)
Corner Stapling:
11” x 17”, LGL, LTR, LTRR, and EXEC
Double Stapling:
11” x 17”, LGL, LTR, LTRR, and EXEC