Canon imagerunner advance C5550i, User Manual

Page: 792 / 1556

8
Press <OK>.
<Display Notification When Job Is Accepted>
<Function Settings> <TX> <Common Settings>
You can select whether to display a screen prompting you to check the communication status after sending/
saving documents using <Fax> or <Scan and Send> on the Main Menu.
<Register Unit Name>
<Function Settings> <TX> <E-Mail/I-Fax Settings>
You can register the name of your company or department as the unit name. The registered name is displayed/
printed at the recipient as the sender information when you send an e-mail/I-fax. Fax Line Settings(P. 60)
● The e-mail address used in the login service appears in the From field on the recipient's machine for
e-mail messages and I-fax documents. Registering User Information in the Local Device(P. 561)
● If you press <E-Mail/I-Fax Settings> set <Specify Authentication User as Sender> to <On>, the e-mail
address registered for the login user is displayed as the sender's name in the From field for the
recipient, regardless of the login service being used.
<Communication Settings>
<Function Settings> <TX> <E-Mail/I-Fax Settings>
You can specify the settings for a mail server and an authentication method that you are using for e-mails/I-
faxes. Setting E-mail/I-Fax Communication(P. 62)
● If you set shorter than 10 minutes (excluding '0 min') for <POP Interval>, the machine will not
completely enter the Sleep mode.
● The machine can only receive I-faxes and communication error notices.
<Specify Port Number for SMTP TX/POP RX>
<Function Settings> <TX> <E-Mail/I-Fax Settings>
You can change the port number of the SMTP and POP.
<S/MIME Settings>
<Function Settings> <TX> <E-Mail/I-Fax Settings>
You can set S/MIME. If you set S/MIME, you can add a digital signature or encrypt the e-mail when using the e-
mail/I-fax function.
Settings/Registration
780