manualshive.com logo in svg

Canon imageRUNNER ADVANCE C350iF, Starter Manual, Page: 17 / 96

Share
Download
Canon imageRUNNER ADVANCE C350iF Starter Manual Download Page 17

15

Installing the Machine

4 

Installing the Toner Cartridge

01 

Open the front cover of the main unit.

02 

Open the package of the toner 

cartridge, and remove the toner cartridge.

03 

Hold the new toner cartridge in both 

hands as shown in the illustration, and shake 

it vertically approximately 10 times.

9~10

IMPORTANT

Do not shake the toner cartridge in the direction 
shown in the illustration. Doing so may cause the 
toner to not output properly.

04 

Insert the new toner cartridge.

1.  Match the new toner cartridge with the slot on the 

main unit as shown in the illustration.

2.  Push the new toner cartridge in as far as possible.

NOTE

Support the toner cartridge with one hand from 
underneath while pushing it into the machine with 
the other hand.

05 

Close the front cover of the main unit.

CAUTION

When closing the cover, be careful not to get your 
fingers caught, as this may result in personal injury.

5 

Loading Paper into the Paper 

Drawer for the First Time

For instructions on loading plain paper into the paper 
drawer, see "Loading Paper into a Paper Drawer," on p.40.

Summary of Contents for imageRUNNER ADVANCE C350iF

































































































Reviews:

No comments