Canon imageRUNNER ADVANCE C2200 Series, Service Manual

Page: 10 / 109

imageRUNNER ADVANCE C2200 Series Service Guide
imageRUNNER ADVANCE C2200 Series Service Guide March 2013
Revision 1 Page 3
Table 1 - imageRUNNER ADVANCE C2200 Series Comparison
Feature
imageRUNNER ADVANCE
C2230 C2225
Print Speed (ppm) (LTR, B&W and Color) Up to 30 Up to 25
Optimum Copy Volume (copies/prints) Approximately 2,000 to 7,000
Scan Speed
(LTR, 300 dpi,
B&W/Color)
Simplex Approximately 51 ipm/51 ipm
Duplex Approximately 19.6 ipm/19.6 ipm
Scan Speed
(LTR, 600 dpi,
B&W/Color)
Simplex Approximately 30 ipm/30 ipm
Duplex Approximately 13 ipm/13 ipm
Double-Pass Duplex Document Feeder Standard
Feeder Capacity Up to 50 sheets (20 lb bond (80 g/m²))
Resolution
Reading Up to 600 x 600 dpi
Writing Up to 1,200 x 1,200 dpi
Maximum Paper Size 12” x 18”
Maximum Paper Weight 80 lb cover (220 g/m²)
Paper Capacity
Paper Drawer 1
Up to 640 sheets (17 lb bond (64 g/m
2
))
Up to 520 sheets (20 lb bond (80 g/m
2
))
Paper Drawer 2
Up to 680 sheets (17 lb bond (64 g/m
2
))
Up to 550 sheets (20 lb bond (80 g/m
2
))
Multi-Purpose
Tray
Up to 100 sheets (20 lb bond (80 g/m
2
))
Multiple Copies 1 to 999 sheets
Printer Memory 2 GB
Hard Disk Drive 160 GB
Warm Up Time
(at a room temp. of 68°F
(20°C))
1
From Power ON Approximately 34 seconds
From Sleep
Mode
Approximately 10 seconds
From the Quick
Startup Settings
for Main Power
Mode
2
Approximately 7 seconds
FCOT (First Copy
Output Time)
Full Color Approximately 8.9 seconds
B&W Approximately 5.9 seconds
Power Consumption
Maximum Approximately 1.5 kW
In the Sleep
Mode
Approximately 0.8 W
Quick Startup
Settings for Main
Power Mode is
‘Off’
Approximately 0.19 W
Quick Startup
Settings for Main
Power Mode is
‘On’
Approximately 0.45 W
Power Requirements 120 V/7.5 A
Plug Type NEMA 5-15P
1 Activation time may vary, depending on the environment and conditions under which the machine is used.
2 Even if the Quick Startup Settings for Main Power mode is set to ‘On’, the Warm-Up time may be longer, depending on the
conditions under which the machine is used.