
42
A
pp
en
dix
Appendix
Use and distribution of these software
modules, including any updates of
such software modules (collectively,
the "SOFTWARE") are subject to license
conditions below.
(1) You agree that you will comply
with any applicable export control
laws, restrictions or regulations of
the countries involved in the event
that the PRODUCT including the
SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE
retain in all respects the title,
ownership and intellectual property
rights in and to the SOFTWARE.
Except as expressly provided herein,
no license or right, expressed or
implied, is hereby conveyed or
granted by rights holders of the
SOFTWARE to you for any intellectual
property of rights holders of the
SOFTWARE.
(3) You may use the SOFTWARE solely
for use with the PRODUCT.
(4) You may not assign, sublicense,
market, distribute, or transfer the
SOFTWARE to any third party without
prior written consent of rights
holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you
may transfer the SOFTWARE only
when (a) you assign to a transferee
all of your rights to the PRODUCT
and all rights and obligations under
the conditions governing the
SOFTWARE and PRODUCT and (b)
such transferee agrees in writing to
be bound by all these conditions.
(6) You may not decrypt, decompile,
reverse engineer, disassemble or
otherwise reduce the code of the
SOFTWARE to human readable form.
(7) You may not modify, adapt, translate,
rent, lease or loan the SOFTWARE or
create derivative works based on the
SOFTWARE.
(8) You are not entitled to remove
or make separate copies of the
SOFTWARE from the PRODUCT.
(9) The human-readable portion (the
source code) of the SOFTWARE is not
licensed to you.
Notwithstanding (1) through (9) above,
the PRODUCT includes third-party
software modules accompanying the
other license conditions, and these
software modules are subject to the
other license conditions. Please check
Platform Version of the PRODUCT and
refer to the other license conditions
of third-party software modules
described in Appendix of Manual for the
corresponding Platform Version. This
Manual is available at
http://canon.com/oip-manual
.
By using the PRODUCT, you shall be
deemed to have agreed to all applicable
license conditions. If you do not agree
to these license conditions, please
contact your service representative.
which results in reduced telephone line
charges.
*
Approximately 3 seconds per page
fax transmission time based on CCITT/
ITU-T No.1 Chart, (JBIG, Standard
Mode) at 33.6 Kbps modem speed. The
Public Switched Telephone Network
(PSTN) currently supports 28.8 Kbps
modem speeds or slower, depending
on telephone line conditions.
About This Manual
Screens
Screens of the touch panel display used
in this manual are those taken when the
imageRUNNER ADVANCE 8505i has the
following optional equipment attached
to it:
•
Booklet Trimmer-D1
•
Booklet Finisher-W1 PRO
•
Puncher Unit-BT1
•
Paper Folding Unit-J1
•
Document Insertion Unit-N1
•
POD Deck Lite-C1
•
Super G3 FAX Board
Note that functions that cannot be used
depending on the model or options do
not appear on the touch panel display.
Illustrations
Illustrations used in this manual are
those displayed when the imageRUNNER
ADVANCE 8505i has the following
optional equipment attached to it:
•
Upright Control Panel-E1
•
Booklet Finisher-W1 PRO
Trademarks
Apple, AppleTalk, Mac, Macintosh, Mac
OS, and Safari are trademarks of Apple
Inc., registered in the U.S. and other
countries.
Microsoft, Windows, Windows Vista,
Windows Server, Internet Explorer, Excel,
and PowerPoint are either registered
trademarks or trademarks of Microsoft
Corporation in the United States and/or
other countries.
Other product and company names
herein may be the trademarks of their
respective owners.
Third Party Software
This Canon product (the "PRODUCT")
includes third-party software modules.
•
Avant d'installer cet appareil,
l'utilisateur doit s'assurer qu'il
est permis de le connecter à
l'équipement de la compagnie de
télécommunication locale et doit
installer cet appareil en utilisant une
méthode de connexion autorisée. Il se
peut qu'il faille étendre la circuiterie
intérieure de la ligne individuelle
d'abonné, qui a été installée par la
compagnie, au moyen d'un jeu de
connecteurs homologués (rallonge
téléphonique).
•
L'attention de l'utilisateur est
attirée sur le fait que le respect des
conditions mentionnées ci-dessus ne
constitue pas une garantie contre les
dégradations de qualité du service
dans certaines circonstances.
•
L'indice d'équivalence de la sonnerie
(IES) sert à indiquer le nombre
maximal de terminaux qui peuvent
être raccordés à une interface
téléphonique. La terminaison
d'une interface peut consister en
une combinaison quelconque de
dispositifs, à la seule condition que
la somme d'indices d' é uivalence
de la sonnerie de tous les dispositifs
n'excède pas 5.
•
Le nombre d'équivalents sonnerie
(REN) de ce produit est 1.0.
•
Les réparations sur un appareil
certifié doivent être faites par une
société d'entretien canadienne
autorisée par le Gouvernement
canadien et désignée par le
fournisseur. Toute réparation ou
modification que pourrait faire
l'utilisateur de cet appareil, ou tout
mauvais fonctionnement, donne à la
compagnie de télécommunication le
droit de débrancher l'appareil.
•
Pour sa propre protection, l'utilisateur
doit s'assurer que les prises de terre
de l'appareil d'alimentation, les
lignes téléphoniques et les tuyaux
métalliques internes, s'il y en a, sont
bien connectés entre eux. Cette
précaution est particulièrement
importante dans les zones rurales.
CAUTION
Au lieu d'essayer de faire ces
branchements eux-mêmes, les
utilisateurs sont invités à faire appel à un
service d'inspection faisant autorité en
matière d'électricité ou à un électricien,
selon le cas.
N O T E
Respecte les limites de la classe A de la
NMB-003 du Canada.
Super G3
Super G3 is a phrase
used to describe the
new generation of
fax machines that use
ITU-T V.34 standard 33.6
Kbps* modems. Super G3 High Speed
Fax machines allow transmission times
of approximately 3 seconds* per page