imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide
December 2013
Revision 1
Page 3
Table 1 – imageRUNNER ADVANCE 6200 Series Comparison
Feature
imageRUNNER ADVANCE
6275
6265
6255
Copy / Print Speed (ppm) (LTR)
Up to 75
Up to 65
Up to 55
Optimum Copy Volume (copies/prints)
(Approximately)
30,000-150,000
30,000-110,000
30,000-70,000
Scan Speed
(LTR, 300 dpi)
Simplex
B&W
120 ipm (images per minute)
Color
85 ipm
Duplex
B&W
200 ipm
Color
100 ipm
Scan Speed
(LTR, 600 dpi)
Simplex
B&W
120 ipm
Color
51 ipm
Duplex
B&W
120 ipm
Color
51 ipm
Resolution
Scan / Copy
Up to 600 x 600 dpi
Up to 1,200 x 1,200 dpi
ADF (Automatic Document Feeder)
Single-Pass Duplexing ADF (Standard)
ADF Capacity (20 lb bond (80 g/m²))
Up to 300 sheets
Maximum Paper
Size
Paper Drawers 1 and 2
Letter (only)
Cassettes 1 and 2
11” x 17”
Paper Deck Unit-A1
Letter (only)
Paper Deck Unit-D1
11” x 17”
Multi-Purpose Tray
11” x 17”
Paper Weight
Paper Drawers,
Paper Cassettes and
Paper Decks
14 lb bond to 80 lb cover (52 to 220 g/m²)
Multi-Purpose Tray
14 lb bond to 140 lb index (52 to 256 g/m²)
Paper Capacity
(20 lb bond (80
g/m
2
)
Standard
Two Paper Drawers: Up to 1,500 sheets each
Two Paper Cassettes: Up to 550 sheets each
Multi-Purpose Tray: Up to 100 sheets
Optional
Paper Deck Unit-A1 or Paper Deck Unit-D1
Up to 3,500 sheet paper deck
Maximum
Up to 7,700 sheets
Multiple Copies
1 to 9,999 sheets
Printer Memory
Standard
1.5 GB
Maximum
2 GB
Hard Disk Drive
Standard
160 GB
Maximum
1TB
Warm Up Time
(at a room temp.
of 68°F (20°C))
From Power On
Approximately 30 seconds
From Sleep Mode
Approximately 30 seconds
From Quick Startup
Mode
Approximately 7 seconds
(Approximately 10 seconds when equipped
with the 1 TB HDD)
FCOT (First Copy Output Time)
Approximately
3.1 seconds
Approximately 3.3 seconds
2
Requires the optional Additional Memory Type-D (512 MB).
3
Paper Deck Unit A1 and Paper Deck Unit-D1 optional.
4
If "Quick Startup Settings for Main Power" is set to On, it takes 7 seconds until the key operation on the touch panel display is
available after turning ON the main power.