manualshive.com logo in svg

Canon imageRunner Advance 6255, Basic Operation Gude, Page: 128 / 214

Share
Download
Canon imageRunner Advance 6255 Basic Operation Gude Download Page 128

128

3

Reconnect the paper deck to the main unit.

If the paper jam message is no longer displayed when you reconnect the paper deck, proceed to 
step 7.

When reconnecting the paper deck to main unit, be careful not to get your fi ngers caught, as this 
may result in personal injury.

4

Open the paper deck.

 

1  Press the open button.
2  Open the paper deck.

The inside lifter automatically 
descends to the paper loading 
position.

 

If the machine is in the Sleep mode (the touch panel is not displayed, and only 

(Energy Saver)is lit), you 

may be unable to open the paper deck unit. In this case, press 

(Energy Saver)to reactivate the machine, 

and then press the open button on the paper deck unit. 

5

Remove any jammed paper.

Look carefully, as jammed paper may be diffi

  cult to see.

Summary of Contents for imageRunner Advance 6255























































































































































































































Reviews:

No comments