Canon imageRUNNER 5065 series, Service Manual

Page: 323 / 596

Chapter 10
10-11
10.5.1.5 Front Cover
10.5.1.5.1 Removing the Front Cover
0015-6691
iR5065 / iR 5055 / iR5075 / / /
1) Pull the pin [2] up to draw out.
- Stopper [1] (Pull forward to remove)
2) Lift the front cover [3] to detach.
- 1 screw [4]
F-10-14
10.5.1.6 Rear Cover (Upper)
10.5.1.6.1 Removing the Rear Cover (Upper)
0015-6682
iR5065 / iR 5055 / iR5075 / / /
1) Open the wire saddle [1] and disconnect the connector [2] of the reader
unit communication cable.
F-10-15
2) Detach the rear cover (upper) [2].
- 6 screws [1]
F-10-16
10.5.1.7 Rear Cover (Lower)
10.5.1.7.1 Before Removing the Rear Cover (Lower)
0015-8306
iR5065 / iR 5055 / iR5075 / / /
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-20)
Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-11) Reference[Removing the
Rear Cover (Upper)]
10.5.1.7.2 Removing the Rear Cover (Lower)
0015-6688
iR5065 / iR 5055 / iR5075 / / /
1) Detach the rear cover (lower) [2].
- 8 screws [1]
F-10-17
10.5.1.8 Left Cover (Lower)
10.5.1.8.1 Before Removing the Left Cover (Lower)
0015-8309
iR5065 / iR 5055 / iR5075 / / /
1) Detach the left cover (middle). (page 10-12) Reference[Removing the
Left Cover (Middle)]
10.5.1.8.2 Removing the Left Cover (Lower)
0015-6695
iR5065 / iR 5055 / iR5075 / / /
1) Remove the 2 grip covers [1].
2) Slide out the left deck [2], the cassette 3 [3] and the cassette 4 [4].
3) Detach the left cover (lower) [6].
- 6 screws [5]
[2] [1]
[4]
[3]
[1] [2]
[1]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[1]