Specifying Communications Settings
4-2
Set
ti
ng t
h
e
Se
nd Fu
nctio
n
4
Specifying Communications Settings
This section describes the System Settings items related to the e-mail, I-fax, and
fax functions.
E-Mail/I-Fax Settings
You can change the e-mail and I-fax transmission settings listed below.
■
Maximum Data
S
ize For
S
endin
g
Sets the maximum data size for outgoing e-mail messages and I-fax documents.
If the data size of the document sent from the machine exceeds the specified
maximum data size and <Divided TX over Max.Data Size> is set to ‘On’, the
document is split up into multiple files by page and sent as different e-mail or
I-fax messages.
■
Divided TX over Max.Data
S
ize
Sets whether to divide a document into separate files when it is sent if its size
exceeds the data size you specify.
■
Default
S
ubject
The subject that you enter here is used as the default subject whenever you do
not enter a subject when sending a job.
IMPORTANT
This setting is available only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated.
NOTE
The default settings are:
- Maximum TX Data Size:
3 MB
- Divided TX over Max.Data Size: Off
- Default Subject:
Attached Image
