Canon imageRUNNER 2545i Sending And Facsimile Manual Download Page 266

Page: 266 / 321

Printing Communication Reports

8-9

inting

Comm

unication Repor

ts and

Lists

Printing Communication Reports

This section describes how to print the following communication reports: TX
Report, Activity Report, RX Report, and Fax Activity Report.

TX Report

Follow this procedure to set TX Reports to print automatically.

NOTE

•

The results of e-mail, I-fax, file server, USB memory media device, and fax
transmissions can be printed.

•

The default settings are:
- TX Report: ‘For Error Only’
- Report With TX Image: ‘On’

Pre

(Additional Function

The Additional Functions menu appears.

Pre

[Report

ettin

Summary of Contents for imageRUNNER 2545i


































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands

Canon imageRUNNER 2545i, Sending And Facsimile Manual

Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands