Canon imageRUNNER 2545, Service Manual

Page: 340 / 362

9
9
9-73
9-73
13) Connect the connector of the heater to the 1-Cassette Pickup Unit.
F-9-170
14) Connect the 4 Connectors.
15) Install the Connector Cover.
16) Install the removed Cassettes.
17) Check that the Environment Heater switch is ON.
18) Plug the power plug of the host machine to the outlet.
19) Turn ON the main power switch.
■
In case of 2-Cassette Unit
1) Remove the cassette. 2) Remove the Heater Connector Cover using a flat-blade screwdriver.
• 1 Claw
• 2 Protrusions
MEMO:
When performing this procedure,
it is not necessary to remove
the Host Machine. However, the
figure shows the picture with out
the Host Machine to show easily.
Claw
Heater Connector Cover
Protrusions
F-9-171