Canceling a Job
2-21
Basic O
p
er
ations
2
Canceling a Job
There are several ways to cancel a job. This section describes how to cancel a job
using the Stop key and using the System Monitor screen.
NOTE
Several copies/prints may be output even after you canceled a job.
Using the Stop Key
You can cancel a copy, print, or remote scan job using the Stop key.
1
Press
(Stop).
●
If
the machine is handling only one
job
:
❑
Proceed to step 4.
●
If the machine has multiple
copy or print jobs
:
❑
Proceed to step 2.
NOTE
•
The current job is listed first on the Status screen.
•
The LCD display can display characters in ASCII code. Using other character codes may
cause characters garbled on the LCD display.
•
The messages displayed on the Status screen are as follows:
- <Printing> = Current job
- <Paused> = Current job that has been temporarily stopped by pressing
(Stop).
- <Waiting> = Reserved jobs
2
Use [
] or [
] to select the job
you want to cancel
➞
press [OK].
Copy Paused
Printer Waiting
Report Waiting
Copy Waiting
Status
