Canon imageRUNNER 2320 Reference Manual Download Page 97

Page: 97 / 292

Tone Settings

3-3

Usef

ul Fun

nd Set

Tone Settings

You can set whether or not to sound audible tones. The settings for the following
tones are available:

•

Entry Tone:

sounds when a key is pressed on the control
panel.

•

Error Tone:

sounds when a malfunction occurs (e.g., a
paper jam or operational error).

•

Scan Done Tone:

sounds when scanning is complete.

•

Print Done Tone:

sounds when printing is complete.

NOTE

The default setting is ‘On’ for the Entry Tone and Error Tone, and ‘For Error Only’ for the
Scan Done Tone and Print Done Tone.

Press

(Additional Functions).

The Additional Functions menu appears.

Use [

] or [

] to select <Audible

Tones>

➞

press [OK].

The Audible Tones menu appears.

Use [

] or [

] to select <Entry

Tone>, <Error Tone>, <Scan Done
Tone>, or <Print Done Tone>

➞

press [OK].

Audible Tones

Common Settings

Copy Settings

Printer Settings

Additional Functions

Entry Tone

Error Tone

Scan Done Tone

Print Done Tone

Audible Tones

Summary of Contents for imageRUNNER 2320





































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2320

Reviews:

Related manuals for imageRUNNER 2320

Brands by name

Popular brands

Canon imageRUNNER 2320, Reference Manual

Search results

Summary of Contents for imageRUNNER 2320

Reviews:

Related manuals for imageRUNNER 2320

Brands by name

Popular brands