2
Unless otherwise stated, illustrations used in this
document are for the 2224N with the following
optional equipment attached:
• DADF-AY
• Cassette Feeding Module-AK
Specifying the Basic
Settings
When you turn on the machine for the first time, the Setup
Guide appears on the control panel. Perform the initial
machine setup by following the on-screen instructions.
Control panel
1.
Select the language, the country or region,
and then the time zone.
2.
Set the current date/time.
When you are using the 2224,
proceed to step
4
.
Specifying the Security
Settings
To prevent unauthorized access to the machine, set access
restrictions for Remote UI.
What is Remote UI?
Remote UI allows you to use your computer’s Web
browser to check the machine’s operating status,
change settings, and save items to the Address Book.
1.
To use the Remote UI, select <Yes>.
To continue without using the Remote UI, select
<No> and proceed to step
3
.
2.
To use System Manager mode, select
<Yes>.
• Set the System Manager ID and PIN so that you can
configure the settings for extended functions and
the management of access privileges, etc.
• To continue without using System Manager mode,
select <No> and proceed to step
5
.
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
3
.
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Specifying the Network
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
• You cannot use a wired LAN and a wireless LAN at the
same time.
1
2
3
Configuring the Initial Settings
