Canon imageRunner 2204F, User Manual, Page: 455 / 652

Fax Settings (imageRUNNER 2204F)
1053-074
All the settings about the fax are listed with short descriptions. Default
settings are marked with a dagger ( ).
NOTE
If a screen for entering the System Manager ID and PIN is displayed
Enter the System Manager ID and PIN, tap <Apply>, and press . Setting the System Manager ID
(imageRUNNER 2204F / 2204N / 2004N)(P. 359)
If a screen for entering a PIN is displayed
Enter the PIN with the numeric keys and tap <Apply>. Setting the System Manager PIN (imageRUNNER
2004)(P. 368)
Asterisks (
*
)
● Settings marked with "*1" are unavailable depending on the country or region of purchase.
● Settings marked with "*2" have different values depending on the country or region of purchase.
Basic Settings(P. 447)
TX Function Settings(P. 450)
RX Function Settings(P. 454)
RX Print Settings(P. 456)
Fax Setup Guide(P. 457)
Basic Settings
Specify the basic settings for using the machine as a fax device.
Register Unit Telephone Number
Register the fax number for the machine.
<Menu> <Fax Settings> <Basic Settings> <Register Unit Telephone Number> Register the
fax number <Apply>
Select Line Type
*1
Select the telephone line type used for fax transmission.
Pulse
Tone
Setting Menu List
447