Canon imageRUNNER 1025, Basic Operation Manual

Page: 133 / 327

Fax (imageRUNNER 1025iF Only)
5-10
Introduction to Using Fax Functions
Manual
When you select <Manual> in <RX MODE>, follow the procedure below to receive a fax.
Before using this mode
Be sure to do the following:
Connect your extension telephone to the machine. (See “What This Machine Can Do,” in the e-Manual.)
Set <RX MODE> to <Manual>. (See “Selecting the Receive Mode,” on p. 5-11.)
When an incoming call comes in
DRPD
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive
ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s)
using only one telephone line. Your fax will automatically monitor incoming calls and based on the ring
pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that matches the pattern
assigned by your telephone company. Contact your telephone company for availability.
Before using this mode
Be sure to do the following:
Subscribe to a DRPD service. Contact your telephone campany for availability.
Connect your extension telephone to the machine. (See “What This Machine Can Do,” in the e-Manual.)
Set <RX MODE> to <DRPD>. (See“Selecting the Receive Mode,”on p. 5-11.)
●
●
–
–
●
●
●
–
–
–