Canon imageRUNNER 1025, Basic Operation Manual

Page: 134 / 327

Fax (imageRUNNER 1025iF Only)
5-11
Introduction to Using Fax Functions
Selecting the Receive Mode Selecting the Receive Mode
You can set the fax receive mode to suit your needs.
The default setting is <FaxOnly>.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3 . T X / R X S E T T I N G S
A D D . F U N C T I O N S
3
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
2 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press [ ] or [ ] to select <RX
SETTINGS>, then press [OK].
3 . R X S E T T I N G S
F A X S E T T I N G S
5
Press [ ] or [ ] to select <RX MODE>,
then press [OK].
2 . R X M O D E
R X S E T T I N G S
6
Press [ ] or [ ] to select the desired
receive mode, then press [OK].
F a x O n l y
R X M O D E
<FaxOnly>: Answers all calls as faxes.
<FaxTel>: Switches between fax and voice
calls automatically. For optional settings, see
“TX/RX SETTINGS,” on p. 14-8.
<AnsMode>: Receives faxes automatically and
records voice messages.
<DRPD> (Distinctive Ring Pattern Detection):
Distinguishes between fax and voice calls
using distinctive ring patterns. Select the ring
pattern assigned by your telephone company.
For optional settings, see “TX/RX SETTINGS,”
on p. 14-8.
<Manual>: Does not answer any calls. You
have to manually receive faxes.
For <FaxTel> or <Manual>, make sure an
external telephone is connected to the
machine.
For <FaxTel>, make sure <INCOMING RING> is
set to <ON> so that the external telephone
rings when the machine receives a voice call.
For <AnsMode>, make sure an answering
machine is connected to the machine.
For <DRPD>, subscription to a DRPD service is
required. Contact your telephone company for
availability. –
–
–
–
7
Press [Stop] to return to the standby
mode.
–
–
–
–
–