manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 96

Important

•

Borderless printing is not possible if details such as crop marks and margins are included as data on the periph-
ery of the original.

•

If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting
in order to prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed
borderless.

•

These features cannot be used in combination with borderless printing: special page layouts, centering originals,
and printing cut lines on rolls.

•

If 

Fit Paper Size

 or 

Print Image with Actual Size

 (Windows only) is selected while performing borderless print-

ing, 

Rotate Page 90 degrees (Conserve Paper)

 cannot be selected. Note that if borderless printing is possible,

then even if the original is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.

Choose the method of borderless printing that suits the original, as desired.

•

Scale to fit Roll Paper Width

Enlarge or reduce the original as a whole to match the roll paper width.

Note

•

You can combine this function with rotating pages 90 degrees before printing so that the original width (rela-
tive to portrait orientation) matches the roll paper width in borderless printing.

For instructions on borderless printing of photos, images, and other documents to match the roll paper width,
refer to the following topics, as appropriate for your operating system.

•

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

➔

P.96

•

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)

➔

P.98

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

This topic describes how to enlarge originals before borderless printing to match the roll width, based on the follow-
ing example.

Important

•

When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select 

No

 from the 

Automatic Cutting

 list in the 

Roll Paper Op-

tions

 dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once

printed and cut, please cut the upper and lower bands with scissors.

•

Document: Any type

•

Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)

•

Paper: Roll

•

Paper type: 

Canon Glossy Photo Paper 170gsm

•

Roll paper width: 10 inches (254.0 mm)

1

In the application, create an original that takes up the entire space of the paper size.

Note

•

If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on specifying
the margin, refer to the software documentation.

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

                                                                                                                   

iPF840

                                                                                                                                                                                                                     

User's Guide

 

 

Enhanced Printing Options

Borderless Printing

 

96

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands