manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 612

8

 

Lower the Release Lever and close the Top Cover.

9

 

In a crouching position, push the Roll Unit in.

10

Position the Wheeled Output Stacker by the printer. 

 (See "

Using the Wheeled Output Stacker

.")

➔

P.375

11

Turn the printer on. 

 (See "

Turning the Printer On and Off

.")

➔

P.17

Roll paper cannot be inserted into the Paper Feed Slot

Roll paper cannot be inserted into the Paper Feed Slot

Cause

Corrective Action

The roll paper is warped.

Straighten out curls and reload the roll.

Paper is jammed by the paper feed slot.

Remove the jammed paper.

 (See "

Clearing Jammed Roll Paper

.")

➔

P.605

 (See "

Clearing a Jammed Sheet

.")

➔

P.608

The paper source selection is incorrect.

Press the 

Load

 button and select the paper source.

If paper cannot be advanced from Roll 2 (Lower),
the Roll Unit Cable is disconnected.

Connect the Roll Unit Cable firmly to the Roll Unit Power Supply Inlet and the
inlet on the roll unit.

Cannot load sheets

Cannot load sheets

Cause

Corrective Action

The paper source selection is incorrect. Press the 

Load

 button and select the paper source.

Paper is not cut neatly

Paper is not cut neatly

Cause

Corrective Action

The paper is bent or curled at the cut position.

Straighten out any curling by the edges of the paper.

Paper rises by the ends of the cut position be-
fore it is cut.

Reload the paper correctly.

You are using paper that cannot be cut with the
Cutter Unit.

Specify 

Manual

 in 

Cutting Mode

 in the Control Panel menu and use scissors or

a cutting tool to cut the roll after printing.

 (See "

Specifying the Cutting Method for Rolls

.")

➔

P.360

 

 

Roll paper cannot be inserted into the Paper Feed Slot

                                                                                                                                            

iPF840

                                                                                                                                                                                                                     

User's Guide

 

 

Troubleshooting

Problems Regarding Paper

 

612

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands