manualshive.com logo in svg

Canon imagePROGRAF TX-3100, Online Manual

Share
Download
Canon imagePROGRAF TX-3100 Online Manual Download Page 718

Color Settings dialog box

Color Adjustment Tab

This tab allows you to adjust the color balance by changing the settings of the 

Cyan

, 

Magenta

, 

Yellow

,

Brightness

, and 

Contrast

 options.

Preview

Shows the effect of color adjustment.
The color and brightness change when each item is adjusted.

View Color Pattern

Displays a pattern for checking color changes produced by color adjustment.
If you want to display the preview image with a color pattern, check this check box.

Cyan / Magenta / Yellow

Adjusts the strengths of 

Cyan

, 

Magenta

, and 

Yellow

.

Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color
weaker.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
This adjustment changes the relative amount of ink of each color used, which alters the total
color balance of the document. Use your application if you want to change the total color balance
significantly. Use the printer driver only if you want to adjust the color balance slightly.

Important

• When 

Monochrome

 is selected for 

Color Mode

, the color balance (

Cyan

, 

Magenta

, and

Yellow

) can't be set.

Brightness

Adjusts the brightness of your print. You cannot change the levels of pure white and black.
However, the brightness of the colors between white and black can be changed. Colors become
brighter as you drag the slider toward the right and darker as you drag the slider toward the left.
You can also directly enter brightness values that are linked to the slider bar. Enter a value in the
range from -50 to 50.

Contrast

Adjusts the contrast between light and dark in the image to be printed.
Moving the slider to the right increases the contrast, moving the slider to the left decreases the
contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.

Matching Tab

Allows you to select the method for adjusting colors to match the type of document to be printed.

Color Correction

Allows you to select 

Driver Matching

, 

ICC Profile Matching

, 

ICM

, or 

Off

 to match the purpose of the

print operation.

Driver Matching

Print with the optimal color using the driver's original color profile. Normally, you should choose
this mode.

718

Summary of Contents for imagePROGRAF TX-3100




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands