216
217
6
1
0
Custom
Function
Function Description
Setting
No.
1
2
AF-ON/AE lock
button switch
Me AF start/disable (AF-on button)
Disable
1
0
Enable (reverse role of AEL and AF-on buttons)
4
5
Tv/Av setting for
Manual exp.
12
13
Timer length for timer
6
7
0
1
0
Normal
1
Reverse direction
0
Disable
1
Enable (possible to set aperture on body w/o lens)
15
19
(Cont.)
–
Metering start/Meter + AF start (no AF at shutter button)
AE lock/Me AF start
C.Fn IV: Operation/Others
√
Operation/Others
Shutter curtain sync.
0
1
2
3
4
Me AF start (at both buttons)
Me AF start/AF stop
10
0
1
Quick start (
<
FEL
>button)
Default (from LV)
0
1
2
3
_
Add aspect ratio
information
0
1
2
3
4
5
Aspect ratio 5:7
Off
Aspect ratio 6:6
Aspect ratio 3:4
Aspect ratio 4:5
Aspect ratio 6:7
Aspect ratio 10:12
0
1
On (used by optional Original Data Security Kit)
Off
16
Add original verification
data
3
Quick Control Dial
in meter
Exposure comp/Aperture
AF point selection (instant AF point access with rear dial)
2
ISO speed (instant ISO access with rear dial)
3
AF point sel
<->
4
Assign SET button
0
1
2
3
4
5
6
7
Normal (disabled)
White balance
Image size
ISO Speed
Picture Style
Record func. + media/folder
Menu display
Image playback
Tv= / Av=
Tv= / Av= (reverse functions in M mode for top/rear dials)
Dial direction during
Tv/Av
Av setting without lens
8
9
0
Rear LCD panel
1
LCD monitor (displayed when FUNC button pressed)
0
Protect (hold: Record memo)
1
Record memo (Protect: Disabled)
2
Play memo (hold: Record memo)
0
Normal (enable)
1
WB + media/image size
setting
Button function
Button function when
<
off
>
11
Start movie shooting
0
1
Enable (as low as 40ms, depending upon lens aperture)
Disable (standard 55ms “time lag”)
14
Shortened release
time lag
Focusing Screen
Disable , , Multi-controller
Disable (use camera’s built-in settings)
Enable (apply user-registered changes)
Register
6 sec. timer: 0–6–59 sec., 1–60 min.
16 sec. timer: 0–16–59 sec., 1–60 min.
Time after release: 0–2–59 sec., 1–60 min.
Apply
Ec-C IV
Ec-A, B, C, C II, C III, D, H, I, L
Ec-S
Ec-N, R
Register
Limited shots: 99–2
Apply
ISO speed +
<->
Function Description
Setting
No.
1
2
3
4
5
6
7
1
2
3
4
1
2
3
4
5
6
7
8
1
2
3
4
5
6
Exposure level increments
ISO speed setting increments
ISO expansion
Bracketing auto cancel
Bracketing sequence
Safety shift
Flash sync. speed in Av mode
Long exposure noise reduction
High ISO speed noise reduction
Highlight Tone Priority
Auto Lighting Optimizer
Lens drive when AF impossible
Lens AF stop button function
AF point selection method
Superimposed display
AF-assist beam firing
Mirror lockup
AF point area expansion
AF Microadjustment
Shutter button/AF-ON button
AF-ON/AE lock button switch
Assign SET button
Dial direction during Tv/Av
Focusing screen
Add original decision data
0
1/3-stop
1
1/2-stop
0
1/3-stop
1
1-stop
0
Off
1
On
0
On
1
Off
0
0, –, +
1
–, 0, +
0
Disable
1
Enable (Tv/Av)
0
Auto
1
1/200–1/60 sec. (auto)
2
1/200 sec. (fixed)
0
Off
1
Auto
2
On
0
Standard
1
Weak
2
Strong
3
Disable
0
Disable
1
Enable
0
Standard
1
Weak
2
Strong
3
Disable
0
Focus search on
1
Focus search off
0
AF stop
1
AF start
2
AE lock
3
AF point: M Auto/Auto ctr
4
ONE SHOT AI SERVO
5
IS start
0
Normal
1
Multi-controller direct
2
Quick Control Dial direct
0
On
1
Off
0
Enable
1
Disable
0
Disable
1
Enable
0
Disable
1
Enable
0
Disable
1
Adjust all by same amount
2
Adjust by lens
0
Me AF start
1
Me AF start/AF stop
2
Metering start/Meter + AF start
3
AE lock/Me AF start
4
Me AF start/disable
0
Disable
1
Enable
0
Normal (disabled)
1
Change quality
2
Change Picture Style
3
Menu display
4
Image replay
5
Quick control screen
6
Record movie (Live View)
0
Normal
1
Reverse direction
0
Eg-A
1
Eg-D
2
Eg-S
0
Off
1
On
C.Fn IV: Operation/Others
C.Fn II: Image
C.Fn III: Autofocus/Drive
C.Fn I: Exposure
Custom
Function
6
8
Viewfinder info.
during exp.
0
Disable
1
0
1
Enable (viewfinder info visible during bursts)
Off
On during Bulb
9
LCD panel illumination during
Bulb
10
INFO button when
shooting
0
Displays shooting function
1
Displays camera settings
4
Al Servo AF tracking method
0
Main focus point priority
1
Continuous AF track priority (ignores closer objects)
5
Lens drive when
AF impossible
9
Multi-controller while meter
10
Selectable AF point
6
Lens AF stop button function
(select Canon Super-telephoto
IS lenses only)
0
Focus search on
1
Focus search off
0
AF stop
1
AF start
2
AE lock
–
Slow: -2, -1, 0, +1, +2: Fast
Off
AF point selection
45 points
Disable
Switch with
< >
Only while
< >
is pressed
11
12
Switch to registered AF point
1
USM lens electronic MF
2
AI Servo tracking sensitivity
MF possible after One-shot AF completed
Disable after One-shot AF
Disable completely in AF mode
0
1
2
Setting
Custom
Function
Function Description
No.
5
E-TTL II flash metering
Limit continuous shot count
–
Evaluative flash metering
Disable
Enable
Average flash metering over all 63 metering zones
7
Flash firing
Enable
Disable – AF assist beam continues to operate
C.Fn III: Autofocus/Drive
3
AI Servo 1st/2nd image
priority
0
AF priority/2nd shot onward – Tracking priority
1 AF priority/2nd shot onward – Drive speed priority
Release/2nd shot onward – Drive speed priority
Shutter curtain sync.
0
1st-curtain synchronization
1
0
1
4
(Cont.)
Disable
4
0
1
2nd-curtain synchronization (EOS Speedlites only)
2
Release/2nd shot onward – Tracking priority
3
4
ONE SHOT AI Servo
5
IS start
6
Switch to registered AF point
7
Spot AF
7
AF Microadjustment
0
1
2
Disable (no adjustment for front or back-focus)
Adjust all by same amount
Adjust by lens
Forward: -20 ……. 0 …… +20 Backward
8
AF expansion with
selected pt
0
0
1
2
Disable (one AF point only when manually selected)
1
Left/right AF point
2
Surrounding AF points
3
0
1
0
19 points
1
11 points
2
Inner 9 points
3
Outer 9 points
4
All 45 points area
AF point auto selection
0 direct: disable / : enable
direct: disable / : disable (auto AF select mode impossible to access)
1
direct: enable / : enable
2
13
AF point display
during focus
0
1
2
On (red illumination on)
Off
On (lights momentarily when focus achieved)
14
AF point brightness
0
Normal
1
Brighter
16
Orientation linked AF point
0
Same for both vertic./horiz.
1
Select different AF points
15
AF-assist beam firing
0
Enable (Speedlite’s AF assist beam fires normally)
1
Disable
2
IR AF assist beam only
17
Mirror lockup
0 Disable
1 Enable (mirror lowers after each shot)
2 Enable: Down with SET (mirror remains up until SET pressed)
18
Continuous shooting
speed
–
Disable (shoots at default fps rates)
Enable (applies user-registered fps rates)
Register
High speed: 10 - 2 fps (per shot)
Low speed: 1 - 9 fps (per shot)
Apply
3
AF point:M Auto/Auto ctr
19
1
Exposure level
increments
1/3-stop set 1/3-stop compensation
0
1
1-stop set 1/3-stop compensation
2
ISO speed setting
increments
0
ISO set in 1/3-stop increments
1
ISO set in 1-stop increments
2
1/2-stop set 1/2-stop compensation
3
Set ISO speed range
Disable (camera ISO range 100~3200)
Enable (apply user-registered available ISO range)
Register
Highest ISO Speed
Lowest ISO Speed
Apply
100 - 12800, H1,H2,H3 [TD] (1-stop increments)
L, 100 - 12800
–
4
Bracketing Auto Cancel
0 On (AEB cancels if camera turned off, etc.)
1 Off (AEB remains in effect unless flash turned on)
6
Number of bracketing shots
0
3 shots
1
2 shots
2
5 shots
3
7
0
Disable (spot metering always at center)
1
8
Safety Shift
0
1
2
Enable (Tv/Av modes)
Disable
Enable (ISO speed shifts, in P, Tv, Av modes)
Enable (spot metering at manually selected AF pt.)
9
Select usable
shooting modes
–
Disable (all exposure modes available)
Enable (only modes registered are selectable)
Register
M
Tv
Av
P
BULB
Apply
Register
Apply
10
Select usable
metering modes
–
Disable (all metering patterns available)
Enable (only metering modes registered are selectable)
11
Exposure mode in
manual expo.
0
1
2
3
4
Specified metering mode on camera’s LCD panel
Evaluative metering only in M mode
Partial metering only in M mode
Spot metering only in M mode
Center-weighted average only in M mode
12
Set shutter speed range
–
Disable
Enable (apply user-registered range)
Register
Highest speed: 8000–15˝ (1-stop increments)
Lowest speed: 30˝–4000 (1-stop increments)
Apply
Disable (use lens’s full aperture range)
Enable (apply user-registered aperture range)
Register
Min. aperture (Max. f/): 1.4–91
Max. aperture ((Min. f/): 1.0–64
With AE lock button (AF on)
With AE lock button (AF off)
Apply
13
Set aperture value range
–
14
Apply shooting/
Metering mode
–
Register
Disable (no switching to registered settings)
Enable (Press “ * ” button to switch settings)
15
Flash sync. speed in
Av mode
0
1
Auto (shutter speed set based on ambient light)
1/300 sec - 1/60 sec. auto
2
1/300 sec. (fixed)
1
Long exp. noise
reduction
0
Off
1
Auto (camera decides whether to apply reduction)
2
On (noise reduction applied; 1 sec. and longer only)
2
High ISO speed
noise reduction
0
Standard
1
Low
2
Strong
3
Disable
3
Highlight tone priority
Disable
0
1 Enable
4
Auto Lighting Optimizer
0
Standard
1
Low
3
Strong
16
AE
Microadjustment
–
–
Disable
Enable (±1 stops in 1/8-stop increments)
17
FE
Microadjustment
Disable
Enable (±1 stops in 1/8-stop increments)
5
Bracketing sequence
0
0 – +
– 0 +
+ 0 –
1
2
Spot metering link
to AF point
3
7 shots
–
C.Fn I: Exposure
C.Fn II: Image/Flash exp/Display
Setting
Custom
Function
Function Description
No.
Errors and omissions excepted. Custom Functions are subject to change without notice.
EOS-1D Mark IV
Custom Function Chart
EOS 5D Mark II
Custom Function Chart
