background image

imagePROGRAF iPF8400S Service Guide 

 

imagePROGRAF iPF8400S Service Guide 

 

September 2013 

 

 

Page 32

 

B. 

Canon imagePROGRAF Large Format Printer Limited Warranty 

The limited warranty set forth below is given by Canon U.S.A., Inc. and Canon Canada, Inc. (collectively "Canon") with 

respect to the Canon imagePROGRAF Large Format Printer packaged with this limited warranty and Canon branded 
accessories and options designed for use with the imagePROGRAF Large Format Printer (collectively, the "Product").  

Canon warrants the Product to be free from defects in workmanship and materials under normal use and service for a 
period of one (1) year after delivery to the original purchaser (“Purchaser”) by Canon or its authorized dealer.  During 

the relevant warranty period, Canon shall, in its sole discretion and without charge, repair or replace any defective part 
with a new or comparable rebuilt part or replace the Product with a new or rebuilt Product.  Warranty replacement shall 

not extend the warranty period of the defective Product.  This warranty shall not extend to the Canon Printhead for the 
Product, for which a separate warranty is given. Nor shall this warranty cover other consumable parts or consumables, 

such as paper and ink cartridges, as to which there shall be no warranty or replacement. 
You must call for remote diagnostic assistance for operation and support of the Product at  

In the United States: 

  Your local Service Provider; or call 

  1-800-423-2366, Monday through Friday from 

8:00 a.m. to 8:00 p.m. ET  

In Canada: 

  Your local Service Provider; or call 

  1-800-OK-CANON, Monday through Friday 

from 9:00 a.m. to 5:00 p.m. ET  

You must cooperate with Canon in remotely diagnosing the Products malfunction.  Canon may attempt to correct the 
malfunction remotely, with your assistance.  If Canon cannot fix your Product’s malfunction through remote diagnostics, 
Canon shall schedule an on-site service call by an independent authorized Canon Service Provider (the "Service 
Provider") or Canon will send you a replacement part for any defective user replaceable item.  You will be charged at the 
then-current service call rates of Canon or the Service Provider if the defects in the Product are not covered by this limited 
warranty, or if the applicable warranty period for the Product has expired or warranty coverage has not been sufficiently 
established by appropriate documentation. 
This warranty shall only apply if this Product is used in conjunction with compatible computers, peripheral equipment and 
software, as to which items Canon shall have no responsibility.  NON-CANON BRAND COMPUTERS, PERIPHERAL 

EQUIPMENT AND SOFTWARE WHICH MAY BE DISTRIBUTED WITH THE PRODUCT ARE SOLD AS IS, WITHOUT 
WARRANTY OF ANY KIND BY CANON, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE.  The sole warranty, if any, with respect to such non-Canon brand item is 
given by the manufacturer or producer thereof.   
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, RELATING TO THE USE OR 
PERFORMANCE OF THE PRODUCT.  NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS 

MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE PRODUCT 
SHALL BIND CANON OR ANY SERVICE PROVIDER.  NO WARRANTY IS GIVEN ON ANY USED PRODUCT. 
THIS WARRANTY SHALL BE VOID AND OF NO FORCE AND EFFECT IF THE PRODUCT IS DAMAGED AS A 
RESULT OF (A) ABUSE, NEGLECT, MISHANDLING, ALTERATION, ELECTRIC CURRENT FLUCTUATION OR 
ACCIDENT, (B) IMPROPER USE, INCLUDING FAILURE TO FOLLOW OPERATING OR MAINTENANCE 
INSTRUCTIONS IN, OR ENVIRONMENTAL CONDITIONS PRESCRIBED IN, CANON’S USER'S GUIDE OR OTHER 
DOCUMENTATION FOR THE PRODUCT, (C) REPAIR BY OTHER THAN SERVICE REPRESENTATIVES 
QUALIFIED BY CANON WHO ARE ACTING IN ACCORDANCE WITH CANON’S SERVICE BULLETINS (D) USE OF 
SUPPLIES OR PARTS (OTHER THAN THOSE DISTRIBUTED BY CANON) WHICH DAMAGE THE PRODUCT OR 
CAUSE ABNORMALLY FREQUENT SERVICE CALLS OR SERVICE PROBLEMS OR (E) USE OF THE PRODUCT 
WITH NON-COMPATIBLE COMPUTERS, PERIPHERAL EQUIPMENT OR SOFTWARE, INCLUDING THE USE OF 
THE PRODUCT IN ANY SYSTEM CONFIGURATION NOT RECOMMENDED IN ANY USER'S GUIDE OR OTHER 
DOCUMENTATION FOR THE PRODUCT. NOR DOES THIS WARRANTY EXTEND TO ANY PRODUCT ON WHICH 
THE ORIGINAL IDENTIFICATION MARKS OR SERIAL NUMBERS HAVE BEEN DEFACED, REMOVED, OR 
ALTERED. 
ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON THE 
SOFTWARE DISKETTES OR CD-ROM'S ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AND ANY 
UTILITY SOFTWARE, DISTRIBUTED WITH OR FOR THE PRODUCT, IS SOLD “AS IS” AND WITHOUT WARRANTY 
BY CANON.  THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE 
MANUFACTURER'S LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY LIMITATIONS AND 
DISCLAIMERS THEREON.  PLEASE CONTACT CANON IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY 
OF THE SOFTWARE MANUFACTURER'S LICENSE AGREEMENT. 
NEITHER CANON NOR ANY SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY 
DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY SERVICE 
PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE T0 REALIZE SAVINGS OR OTHER BENEFITS, LOSS OR 
CORRUPTION OF DATA INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT'S HARD DISK 
DRIVE, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, 
STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE 

USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE 
CLAIM IS BASED AND EVEN IF CANON OR ANY SERVICE PROVIDER HAS BEEN  ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ANY SERVICE 
PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE 
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND 
LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS, 
ARISING OUT OF THE POSSESSION, USE, MISUSE OR INABILITY TO USE THE PRODUCT SOLD BY CANON 
NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY SERVICE PROVIDER. THIS 
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE PURCHASER, AND STATES SUCH 
PURCHASER'S EXCLUSIVE REMEDY. 
CONDITIONS OF WARRANTY 
Defective parts must be returned to Canon or a Service Provider with all necessary documentation and will become the 
property of Canon. 
THIS WARRANTY APPLIES TO PRODUCTS SOLD AND USED IN THE U.S.A AND CANADA ONLY.  

 
 
 
 

 

 

Canon U.S.A., Inc. 

One Canon Park, Melville, New York 11747

 

Canon Canada, Inc.

 

6390 Dixie Road

 

Mississauga, Ontario L5T 1P7 Canada

 

 

Summary of Contents for imagePROGRAF iPF8400S







































Reviews: