Canon imagePROGRAF iPF825 MFP Basic Guide No.1, Basic Manual, Page: 2 / 24

2
It is not possible to prepare the printer for transfer if the Display Screen requests Maintenance Cartridge
replacement or checking of the remaining capacity. Replace the Maintenance Cartridge before transfer
preparations. ( → , Replacing the Maintenance Cartridge)
•
Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage
the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit. •
Ink must be drained before Level 2 or Level 3 printer transfer, as described in the following table. Prepare a
Maintenance Cartridge
in advance.
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer
(that is, when you execute the printer menu item to prepare for transfer). •
Always follow the instructions of the service representative when transferring the printer under Level 3 conditions. •
To protect the internal parts in transit, always follow the steps below before transferring the printer to a new
location. Refer to the Setup Guide
for details on packing the printer and installing it after transfer.
Level Permitted Angle of Inclination
Required
Maintenance
Cartridges(*1)
Shipping Method
(Example)
Amount of Ink
to Dispose of
1 By truck Lengthwise: 0°–30° 0 0 or 1
3 Tipping the printer or
holding it upright for
elevators or stairs Lengthwise: 0°–90°
2 By plane All directions: 0°–30°
Approx. 700 ml
Approx. 200 ml
2 or 3
1 or 2
Rotation: 0°–10°
Rotation: 0°–30°
*1: The quantity of maintenance cartridges required depends on the capacity of the Maintenance Cartridge in use.
Preparing to Transfer the Printer
Prepare to transfer the printer as follows.