HP-GL/2 problems
HP-GL/2 problems
HP-GL/2 jobs are printed 6 mm larger than
...................................................................................
HP-GL/2 jobs are printed at maximum size, even if a standard size is
...............................
With HP-GL/2, printing is misaligned
With HP-GL/2, printing is misaligned
Cause
Corrective Action
The plotter origin is incorrect.
Check the printing commands.
Set
Detect img size
to
Command priority
or
Detected size
in the Control
Panel menu.
The
Margin
setting in the Control Panel menu is in-
correct.
Adjust the
Margin
setting values in the Control Panel menu.
Lines or images are missing in printed HP-GL/2 jobs.
Lines or images are missing in printed HP-GL/2 jobs.
Cause
Corrective Action
The memory is full.
Check the size of the data in the print job.
An HP-GL/2 command not supported by this printer was
received.
Check the print job and settings.
The printer has received print data that includes HP RTL
commands when
Auto Rotate
is
On
in the Control Pan-
el menu.
In the Control Panel, set
Auto Rotate
to
Off
and print again.
The plotter origin is incorrect.
Set
Detect img size
to
Command priority
or
Detected size
in the Con-
trol Panel menu.
Oversize
in the Control Panel menu is set to
Off
.
Set
Oversize
to
On
in the Control Panel menu.
Lines are printed too thick or thin in HP-GL/2 print jobs
Lines are printed too thick or thin in HP-GL/2 print jobs
Cause
Corrective Action
The
Width
setting in the Control Panel menu
is incorrect.
Change the
Width
setting configured in
Pen no.
of the
Palette A
or
Palette B
selec-
ted in the Control Panel menu.
ThickenFineLines
in the Control Panel
menu is set to
Off
.
If fine lines are printed faintly, setting
ThickenFineLines
to
On
will print the lines
more distinctly.
The
Ln wdth correct
setting in the Control
Panel menu is incorrect.
Change the
Ln wdth correct
setting in the Control Panel menu.
HP-GL/2 jobs are printed in monochrome (or color)
HP-GL/2 jobs are printed in monochrome (or color)
Cause
Corrective Action
The
Color Mode
setting in the
Control Panel menu is incor-
rect.
Check the
Color Mode
setting in the Control Panel menu.
However, for optimal Printhead performance, the printer consumes trace amounts of color ink even
when
Monochrome
is selected as
Color Mode
.
iPF785
With HP-GL/2, printing is misaligned
HP-GL/2 problems
591
Summary of Contents for imageprograf IPF785
