manualshive.com logo in svg

Canon imageprograf IPF785, User Manual

The Canon imageprograf IPF785 User Manual is the perfect guide for maximizing the potential of this high-performance printer. From detailed instructions to helpful tips, this manual ensures seamless operation and troubleshooting. Download your free copy from manualshive.com to unlock the full potential of your Canon imageprograf IPF785.

Share
Download
background image

Cannot print over a network

Cannot print over a network

Cannot connect the printer to the network .........................................................................................................

588

Cannot print over a TCP/IP network .......................................................................................................................

588

Cannot print over a Bonjour network .....................................................................................................................

588

Cannot connect the printer to the network

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer
on. For instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The bottom indicator is green if the printer is connected via 1000Base-T, while the top indicator is orange
if connected via 100Base-TX and the top indicator is green if connected via 10Base-T.
If the Link indicator is not lit, check the following points.

•

Make sure the connection point is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the connection point.
Although the printer normally detects the communication mode and transmission rate of the communi-
cation point automatically (in auto negotiation mode), sometimes the communication point settings
cannot be detected. In this case, configure the connection method manually, specifying the communi-
cation mode in use.

 (See "Configuring the Communication Mode Manually.")

➔

P.459

Cannot print over a TCP/IP network

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not configured
correctly.

Make sure the printer's IP address is configured correctly.

 (See "Configuring the IP Address Using imagePROGRAF Device Setup Utility.")

➔

P.461

 (See "Configuring the IP Address Using the Printer Control Panel.")

➔

P.450

The printer's TCP/IP network settings are
not configured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer's TCP/IP Network Settings With RemoteUI.")

➔

P.454

The computer you are trying to print from
is not configured correctly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer Driver Destination (Windows).")

➔

P.453

 (See "Configuring the Destination in TCP/IP Networks (Mac OS).")

➔

P.457

Cannot print over a Bonjour network

Cannot print over a Bonjour network

Cause

Corrective Action

The computer you are trying to
print from is not configured cor-
rectly.

Make sure the computer is configured correctly.

 (See "Configuring the Destination for Bonjour Network (Mac OS).")

➔

P.457

The computer and printer are not
on the same network.

Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.

Cannot connect the printer to the network

                                                                                                                                                       

iPF785

                                                                                                                                                                                                                     

User's Guide

 

 

Troubleshooting

Cannot print over a network

 

588

Summary of Contents for imageprograf IPF785

































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imageprograf IPF785

Canon CX-G2400 Basic Operation Manual preview
CX-G2400
Brand: Canon Pages: 58
Canon image Prograf iPF680 Series Basic Manual preview
image Prograf iPF680 Series
Brand: Canon Pages: 132
Canon i470D Series Printing Manual preview
i470D Series
Brand: Canon Pages: 44
Canon imageClass LBP6230dw Getting Started preview
imageClass LBP6230dw
Brand: Canon Pages: 16
Canon i960 Series Printing Manual preview
i960 Series
Brand: Canon Pages: 2
Canon imageprograf IPF785 Service Manual preview
imageprograf IPF785
Brand: Canon Pages: 42
Canon CX 320 User Manual preview
CX 320
Brand: Canon Pages: 148
Canon Color Bubble Jet BJC-8200 Quick Start Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 6
Canon Color Bubble Jet BJC-1000 Series Specification preview
Color Bubble Jet BJC-1000 Series
Brand: Canon Pages: 2
Canon BJC-S530D Start Here preview
BJC-S530D
Brand: Canon Pages: 2
Canon BJC-S520 Setup Instructions preview
BJC-S520
Brand: Canon Pages: 2
Canon Color Bubble Jet BJC-8200 Service Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 105
Canon i9900 Series Start Here preview
i9900 Series
Brand: Canon Pages: 2
Canon i900D Series Quick Start Manual preview
i900D Series
Brand: Canon Pages: 68
Canon i900D Series Printing Manual preview
i900D Series
Brand: Canon Pages: 4
Canon i900D Series Setup Instructions preview
i900D Series
Brand: Canon Pages: 2
Canon i80 Series Setup Instructions preview
i80 Series
Brand: Canon Pages: 2
Canon imagePROGRAF iPF830 Setup Manual preview
imagePROGRAF iPF830
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands