manualshive.com logo in svg

Canon imagePROGRAF iPF770, User Manual, Page: 340 / 594

Share
Download
Canon imagePROGRAF iPF770 User Manual Download Page 340

Handling sheets

Handling sheets

Loading Sheets in the Printer ..........................................................................................................................

340

Changing the Type of Paper ...........................................................................................................................

325

Printing From a Desired Starting Point ............................................................................................................

342

Removing Sheets ...........................................................................................................................................

344

➔

Clearing a Jammed Sheet ........................................................................................................................

530

➔

Clearing Jammed Paper (Paper Feed Slot) ...............................................................................................

532

Loading Sheets in the Printer

Loading Sheets in the Printer

Follow these steps to load sheets in the printer.

Important

•

One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time.
This may cause paper jams.

•

Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The sheet may jam if it curls
before feeding or printing and the trailing edge drops toward the front.

•

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.

•

Load the paper straight. Loading paper askew will cause an error.

 (See "Paper is crooked..")

➔

P.561

Note

•

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

1

Select sheets as the paper source.

•

If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on
the Display Screen. Go to the next step.

•

If no print job was received

1.

 

Press the 

Load

 button.

2.

Press 

▲

 or 

▼

 to select "

Load Cut Sheet

", and then press the 

OK

 button.

Note

•

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press 

▲

 or 

▼

 to select 

Yes

, and then press the 

OK

 button. Remove the paper and go to the next step.

 

Loading Sheets in the Printer

                                                                                                                                                                                  

iPF770

                                                                                                                                                                                                                     

User's Guide

 

 

Handling and Use of Paper

Handling sheets

 

340

Summary of Contents for imagePROGRAF iPF770



















































































































































































































































































































































































































































































































































































































Reviews:

No comments