Canon imagePROGRAF iPF750 MFP M40, User Manual

Page: 698 / 878

Setting Item Description, Instructions
Inter-
face
Setup Ether-
net
Driver
MAC Address Indicates the MAC address.
Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the
default values.
System
Setup Sleep Timer Specify the period before the printer enters sleep
mode.
Buzzer Choose On for the buzzer to sound in case of errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date &
Time Date Set the current date.
Time Set the current time. Available only if the Date setting
is specified.
Date Format Specify the date format.
Language Specify the language used on the Display Screen.
Time Zone Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Length Unit Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area , and so on.
Detect Mismatch Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type
and size in the printer driver.
Choose
Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing af-
ter notification. Choose None to continue printing
without notification.
Paper
Size
Basis Roll Selection 1 If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
Roll Selection 2 If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll
of an intermediate width is detected.
Keep Paper Size Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the mar-
gin from being printed.
Control Panel > Printer Menu >
Menu Settings iPF750
8
682