Canon imageprograf iPF685 User Manual Download | Manualshive

Page: 620 / 642

background image

Top cover is open.

Top cover is open.

Cause

Corrective Action

The printer has detected that the Top Cover is
open.

Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.

If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.

Prepare for parts replacement.

Prepare for parts replacement.

Cause

Corrective Action

It is almost time to replace consumables for
which service is required.

If "

Parts replacement time has passed.

" is displayed, you can continue to use the

printer for some time.
Contact your Canon dealer for assistance.

Parts replacement time has passed.

Parts replacement time has passed.

Cause

Corrective Action

It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance.

Unknown file.

Unknown file.

Cause

Corrective Action

Data sent to keep the printer up to date (such as pa-
per information) is in the wrong format.

Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.

You have uploaded firmware for a different model.

Check the firmware version. Turn off the printer and wait a while before re-
storing power, and then resend the firmware.

If the message is displayed again, contact your Canon dealer for assistance.

Multi-sensor error

Multi-sensor error

Cause

Corrective Action

Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.

Take steps to ensure the printer is not used when exposed to direct sunlight
or strong lighting.

The performance of a sensor inside the printer may
be impaired.

Turn off the printer and wait at least three seconds before restoring the pow-
er.
If the message is displayed again, contact your Canon dealer for assistance.

Error in cutter position.

Error in cutter position.

Cause

Corrective Action

The Cutter Unit stops in the middle of cutting.

1.

Push the Release Lever back and remove the paper.

2.

Pull the Release Lever forward.

Top cover is open.

iPF685

Error Message

Other Messages

620

«
...
618
619
620
621
622
...
»

Summary of Contents for imageprograf iPF685



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imageprograf iPF685

Brand: Oki Pages: 282

Brand: MakerPi Pages: 21

I-Class Mark II

Brand: Datamax Pages: 12

Brand: Dascom Pages: 12

Brand: Dascom Pages: 19

Brand: Dascom Pages: 5

Brand: Panduit Pages: 74

Brand: Tally Pages: 2

Brand: Tally Dascom Pages: 57

Brand: Fenix Pages: 65

Accel-a-Writer 8300

Brand: Xante Pages: 12

3635MFP - Phaser B/W Laser

Brand: Xerox Pages: 16

Brand: Lanier Pages: 150

Brand: Samsung Pages: 368

Brand: Ricoh Pages: 2

Brand: KIP Pages: 103

Brand: BART-TECH 3D Pages: 34

3500DN - Phaser B/W Laser Printer

Brand: Xerox Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands